Skip to main content

Professional Interior Painting: Your Ultimate Guide

November 29, 2023
5 Interior Painting Tips (2023)

When it comes to painting the house interior and transforming the look and feel of your home, few things make a bigger impact than a fresh coat of paint. Whether you're looking to update a single room or give your entire home a makeover, proper preparation and execution are key to achieving a professional result. As a top-rated general contractor in Akron, Butler Building has extensive experience in home interior painting and renovation projects. In this article, we will share some expert interior painting design tips and best practices to help you achieve a flawless finish in your painting home interior.

The Importance of Preparation

It's crucial to properly prepare the room before starting your wall painting. This step is often overlooked but is essential for achieving a high-quality, long-lasting paint job. Our painting tips include the following preparation process:

  1. Remove hardware: To ensure a smooth painting process, start by removing all hardware, including window locks and lifts, doorknobs and strikes, electrical cover plates, and light fixtures. Label each piece of hardware and store them together in a bucket for easy reinstallation later on. Additionally, relocate furniture to another room whenever possible to create a clear workspace. Cover any items that cannot be removed with plastic sheeting and clear a pathway at least 3 feet wide to navigate the room easily.
  2. Clear out obstacles: Whenever possible, relocate furniture to another room to create a clear workspace. Cover any remaining items with plastic sheeting to protect them from paint splatter.
  3. Protect floors: Protecting your floors is crucial to prevent any accidental spills or paint seepage. While painter's tape can be time-consuming to apply, it is recommended to tape along the bottom of baseboards. Then, tape a wide border of rosin paper to this strip of tape and cover the rest of the floor with plastic-lined canvas drop cloths. This proactive measure will save you time and headaches in the long run.
  4. Fill holes, gaps, and cracks: The key to a flawless paint job is starting with a well-prepared surface. Thoroughly inspect the walls and trim for imperfections such as holes, dents, and cracks. Fill these imperfections using ready-mix spackle for walls or wood filler for trim. For wide cracks on plaster walls, use joint compound and mesh tape, and for smaller cracks, opt for flexible patching compound. Additionally, fill gaps around the trim by applying a small bead of caulk and smoothing it out with a wet finger.
  5. Sand and remove dust: To achieve a smooth and even surface for painting, it's essential to sand the walls, moldings, doors, and windows. Use 220-grit sandpaper to scuff-sand moldings, doors, and windows, and a pole sander with 120-grit paper to smooth the walls. Before proceeding, ensure that the paint you're working on is not lead-based by conducting a lead test. Finally, remove sanding dust thoroughly using a vacuum equipped with a HEPA filter, followed by a damp rag or tack cloth.
Interior Painting

Paint Clean-Up Tips

After completing your painting project, it's crucial to properly clean up your tools and avoid common painting mistakes. Here are some paint tips for clean-up after your paint project:

  1. Remove dried masking liquid: Before removing masking liquid, ensure that the paint is dry to prevent peeling. Use a utility blade to score the mask along the edges of the glass, then lift it off in one piece.
  2. Pull up painter's tape: Once the paint is dry, carefully pull off painter's tape at a 45-degree angle to prevent paint from coming off with it. If the edge is sealed with paint, score along the paint line with a putty knife before removing the tape.
  3. Clean paintbrushes: For latex paint, run the brush under warm water with the bristles pointed down. Use dish detergent and your fingers to work out the paint. Avoid aggressive metal combs and brushes as they can damage the bristles. For oil-based paint, swirl the brush in odorless mineral spirits and blot excess moisture with paper towels. Dry brushes flat or hang them to prevent rusting.
  4. Clean paint-roller covers: Remove excess paint from roller covers using a 5-in-1 tool. For latex paints, rinse the cover under warm water, and for oil-based paints, use solvent in a paint tray. Stand the covers on end to dry.

Remember to choose the appropriate primer for your surfaces, invest in high-quality painting tools, and follow a logical order when painting different areas of your home. With the guidance of a top-rated house painters in Akron like us, you can master wall painting tips and achieve a flawless paint finish when painting a room. If you need further assistance contact Butler Building to get a free estimate.